The Toilet Seat Riser is a hard plastic device designed to raise a conventional toilet seat 2 3/4". The increased height changes the bodies center of gravity and allows the individual to use the facilities with greater ease.

1. Easily attaches to the under side of a conventional seat. All screws and bolts are included. A screw driver is the only tool needed.
2. The seat and cover are not effected in their operation.
3. Easily cleaned
4. Sturdy plastic will not bend or break. Will support in excess of 500 pounds.*
5. Permanent installation but may be removed if necessary.
6. Bumpers on your existing seat may have to be removed. Simply pull them off with a pliers if needed.
7. Will not shift sideways.
8. Will not absorb moisture or odors.
9. Money back guarantee.

*Determined by an independent testing laboratory

To Install

1. Remove your existing seat by lifting the clips (Fig. 1) on the hinges. Remove the bolts attaching the seat to the bowl. The seat may now be removed.
2. Put the 3 3/8" bolts through the hinge and part A. Reverse the procedure of taking the seat off. Tighten the bolts.
3. Line up the edge of the "riser" with the inside edge of the seat. Simply screw the "riser" to the underside.
4. The seat is now ready for use.